Education Background Ph.D.(2008.9-2011.12), Control Theory and Control Engineering, Jiangsu University M.E.(2004.9-2008.6), Control Theory and Control Engineering, Jiangsu University B.E.(2000.9-2004.6), Electrical Engineering, Jiangsu University Working Experience 2017.9-now, Director of Electric Vehicle Drive & Control Research Center, Jiangsu University 2017.5-now, Professor of Automotive Engineering Research Institute, Jiangsu University 2014.8-2017.4, Associate Professor of Automotive Engineering Research Institute, Jiangsu University 2018.10-now, Consultant Technique Director of Tiansuo (Suzhou) Control Technology Co. Ltd 2014.10-2015.10, Senior Visiting Scholar of School of Electrical, Mechanical, and Mechatronic Systems, Faculty of Engineering and Information Technology, University of Technology Sydney |
1. X. Sun, Z. Jin, Y. Cai, Z. Yang, and L. Chen, “Grey wolf optimization algorithm based state feedback control for a bearingless permanent magnet synchronous machine,” IEEE Trans. Power Electron., vol. 35, no. 12, pp. 13631-13640, Dec. 2020. 2. X. Sun, L. Feng, K. Diao, and Z. Yang, “An improved direct instantaneous torque control based on adaptive terminal sliding mode for a segmented-rotor SRM,” IEEE Trans. Ind. Electron., 2020, accepted. 3. X. Sun, J. Wu, G. Lei, Y. Guo, and J. Zhu, “Torque ripple reduction of SRM drive using improved direct torque control with sliding mode controller and observer,” IEEE Trans. Ind. Electron., 2020, DOI: 10.1109/TIE.2020.3020026. 4. X. Sun, J. Cao, G. Lei, Y. Guo, and J. Zhu, “Speed sensorless control for permanent magnet synchronous motors based on finite position set,” IEEE Trans. Ind. Electron., vol. 67, no. 7, pp. 6089-6100, Jul. 2020. 5. X. Sun, Z. Shi, G. Lei, Y. Guo, and J. Zhu, “Multi-objective design optimization of an IPMSM based on multilevel strategy,” IEEE Trans. Ind. Electron., 2020, DOI: 10.1109/TIE.2020.2965463. 6. K. Diao, X. Sun*, G. Lei, Y. Guo, and J. Zhu, “Multiobjective system level optimization method for switched reluctance motor drive systems using finite element model,” IEEE Trans. Ind. Electron., vol. 67, no. 12, pp. 10055-10064, Dec. 2020. 7. X. Sun, M. Wu, G. Lei, Y. Guo, and J. Zhu, “An improved model predictive current control for PMSM drives based on current track circle,” IEEE Trans. Ind. Electron., 2020, DOI: 10.1109/TIE.2020.2984433. 8. X. Sun, L. Chen, H. Jiang, Z. Yang, J. Chen, and W. Zhang, “High-performance control for a bearingless permanent magnet synchronous motor using neural network inverse scheme plus internal model controllers,” IEEE Trans. Ind. Electron., vol. 63, no. 6, pp. 3479-3488, Jun. 2016. 9. X. Sun, K. Diao, G. Lei, Y. Guo, and J. Zhu, “Real-time HIL emulation for a segmented-rotor switched reluctance motor using a new magnetic equivalent circuit,” IEEE Trans. Power Electron., vol. 35, no. 4, pp. 3841-3849, Apr. 2020. 10. X. Sun, C. Hu, Gang Lei, Y. Guo, and J. Zhu, “State feedback control for a PM hub motor based on grey wolf optimization algorithm,” IEEE Trans. Power Electron., vol. 35, no. 1, pp. 1136-1146, Jan. 2020 |
1. Sun Xiaodong, Wu Minkai, Chen Long, Tian Xiang, Yang Zebin, Li Ke. An energy optimization control system for AC permanent magnet motor used in ELECTRIC vehicle EPS. 2. Sun Xiaodong, Feng Liyun, Chen Long, Zhou Weiqi, Tian Xiang. A hybrid excitation double stator bearingless switched reluctance motor. 3. Sun Xiaodong, Cao Junhao, Chen Long, Zhou Weiqi, Tian Xiang. A sensorless controller for automotive EPS steering system. 4. Sun Xiaodong, Hu Changchang, Chen Long, Zhou Weiqi, Yang Zebin, Li Ke. Anti-saturation compound controller of electromagnetic actuator for automotive active suspension and its construction method. 5. Sun Xiaodong, Jin Zhijia, Chen Long, Yang Zebin, Zhou Weiqi, Li Ke. A construction method of active magnetic bearing controller based on look-up table method. |